Description
The "Bolt-On" Front Long Arm System provides the most consistent wheel base measurements throughout the cycle of suspension along with improved pinion angle for your Jeep.
Features Include:
- Frame Mounted Upper/Lower 1/4in Steel Control Arm Brackets
- 2 Upper Long Arm Duroflex Control Arms 1.25DOM .1875 (3/16)wall
- 2 Lower Long Arm Duroflex Control Arms 2.0DOM .25 (1/4)wall
- Beefy 3/16" Steel Replacement Crossmember
- Gold Zinc Protection
- All Required Hardware
- Made in the USA
This is what you want to change out your suspension to front long arms, MetalCloak provides you with everything you need. Thick 2.0 DOM .25 (1/4) wall steel lower control arms provide strength that can take abuse with forged threaded ends for the ultimate in durability. Upper control arms are 1.25DOM .1875 (3/16) and formed to provide clearance for up and down travel. Upper and Lower Control arms utilize our patented Duroflex bushings for bind free, service free articulation.
Fitted with Duroflex™ Joints, the only vulcanized elastomer, self-centering joint enhanced with DuPont™ Kevlar® fiber – providing incredible durability with more misalignment in the control arms and better vibration dampening than anything else available. Exclusive to MetalCloak (see detailed info in the main body).
MetalCloak Front JL Long Arm Frame Mounts are used in replacement of the factory mounts when installing the front control arms for a long arm suspension. Fully welded and boxed for strength, the 1/4" steel brackets are low profile for clearance and are finished in gold zinc for a long lasting finish.
This system requires cutting off the factory front control arm brackets and is for the Rock Crawler that demands precision when it comes to wheelbase and pinon angles.
MetalCloak's Front Long Arm will feature our best high speed handling properties for on and off-road and the "Bolt-On" Front Long Arm System is made in the USA.
Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
Note: If you purchase this system, and decide you do not need a component or part of the system, we cannot accept returns.
Note: Some model Jeep JL and JT have a different crossmember configuration. While installation is still possible, it may require some modification of the MetalCloak crossmember to install correctly.