Description
The Heavy Duty Fox Steering System for the JL Wrangler & JT Gladiator is stylish strength for your Jeep's vulnerable and all important steering system.
Features Include:
- Tubular 1.625” OD .375” Wall Chromoly Tie Rod
- Drag Link
- Gold Zinc Chromate Finish
- 1-Ton Forged Heat Treated Dog Leg Rod Ends
- Rod End Design Controls Tie Rod Flop
- OE Taper Pin and Lock Nut for Exact Fitment
- Sealed with Durable Rubber Grease Boots
- Adjustable While Installed
- Specifically tuned Fox stabilizer/dampener
- WORKS WITH JL/JT STOCK WHEEL BACKSPACING!
The high clearance bends of the strong 1.375 OD Drag Link tubing is engineered for up and down travel providing the needed space for aftermarket axles and differential covers and is coated with gold zinc chromate for a long lasting finish. Factory like fitment with OE taper pin and lock nut are found with the Dual 1-ton forged and heat treated Rod-Ends, they have extra strength right where it is needed and are designed to control directional misalignment to prevent Drag Link flop. Sealed with Durable rubber grease boots, the ends are simple to service via zerk fittings.
The assembly is easily adjusted while mounted on the vehicle for fine tuning of axle placement.
The heavy duty 3/16" axle side steering stabilizer mount bracket installs into factory locations and re-positions the stabilizer up and out of harm’s way. The Fox steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL Wrangler & JT Gladiator.
Choose either the standard steel stabilizer mount or the billet mount; either choice is simple to install, and allows you to position the stabilizer for maximum performance. The standard mount is 3/16" steel and gold zinc plated while the Aluminum billet clamp is Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
The improved performance of this system will assist in the overall improvement of ride and control of your Jeep.
Note: The Fox steering stabilizer kit works with Left Hand Drive applications only.
Note: Raised steering stabilizer requires at least 2" of bump stop to clear frame
Note: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.
Currently Shipping in 3-5 Days
